Shen Gong Precision CNC Machine Tool Teach You How to Install CNC Lathe

Lifting and transportation
The lifting and positioning of machine tools should be carried out using specialized lifting tools provided by the manufacturer, and other methods are not allowed. Special lifting tools are not required, and steel wire ropes should be used to lift and position according to the instructions.

Foundation and location
The machine tool should be installed on a solid foundation and positioned away from the vibration source; Avoid exposure to sunlight and thermal radiation; Place in a dry place to avoid the influence of moisture and airflow. If there is a vibration source near the machine tool, anti vibration trenches must be set up around the foundation.


Installation of machine tools
The machine tool should be placed on the foundation and leveled in a free state, then the anchor bolts should be evenly locked. For ordinary machine tools, the level reading should not exceed 0.04/1000mm, and for high-precision machine tools, the level reading should not exceed 0.02/1000mm. When measuring installation accuracy, it should be done at a constant temperature, and the measuring tool needs to be used after a period of constant temperature time. During machine tool installation, efforts should be made to avoid installation methods that cause forced deformation of the machine tool. During the installation of machine tools, certain components of the machine tool should not be removed casually. The disassembly of these components may result in a redistribution of internal stress within the machine tool, thereby affecting its accuracy.


CNC lathe
Preparation before trial operation

After passing the geometric accuracy inspection of the machine tool, it is necessary to clean the entire machine. Use cotton or silk cloth soaked in cleaning agents, and do not use cotton yarn or gauze. Clean the anti rust oil or anti rust paint applied to protect the guide rail surface and machining surface when the machine tool leaves the factory. Clean the dust on the outer surface of the machine tool. Apply lubricating oil as specified by the machine tool on each sliding surface and working surface.


Carefully check whether all parts of the machine tool have been oiled as required and whether the cooling tank has been filled with sufficient coolant. Whether the oil in the hydraulic station and automatic lubrication device of the machine tool has reached the designated position on the oil level indicator.

Check if all switches and components in the electrical control box are functioning properly, and if all plug-in integrated circuit boards are in place.

Power on and start the centralized lubrication system to fill all lubrication parts and oil circuits with lubricating oil. Make all necessary preparations before the operation of each component of the machine tool.